Expert Wood Stripper - 5 Gallon Pail
Expert Wood Stripper - 32 Oz. Bag
Expert Wood Stripper - 1 Gallon Pail
Expert Wood Stripper - 5 Gallon Pail Swatch
Expert Wood Stripper - Photos of Before and After Application on a Wetted Wall
Expert Wood Stripper - 5 Gallon Pail
Expert Wood Stripper - 32 Oz. Bag
Expert Wood Stripper - 1 Gallon Pail
Expert Wood Stripper - 5 Gallon Pail Swatch
Expert Wood Stripper - Photos of Before and After Application on a Wetted Wall

Expert Clean & Bright Wood Stripper

Expert Clean & Bright Wood Stripper for oil and water-based finishes is made to remove stubborn coatings from wood surfaces.
SKU:
From $44.99
By Expert Stain and Seal
Size
Minus Plus
More details Right

Expert Clean and Bright Wood Stripper is made with Sodium Hydroxide and an added Sodium Metasilicate boost to help lift old oil-based stains, extreme organic growth and some water based coatings. A butyl booster can be added to remove tough water-based stains.

Always brighten the wood after using this cleaner using Expert Clean and Bright Wood Brightener.

Mixing Instructions
• For a light strip, mix 2 oz. cup per gallon of water.
• For a medium strip, mix 4 oz. per gallon of water.
• For a heavy strip, mix 8 oz. per gallon of water.

General Instructions
• Strippers must be kept wet or they will not work.  A light mist every few minutes will suffice.
• Test on a small, inconspicuous area of the wood to ensure proper wood care.
• Always wet plants, shrubs, and other surrounding vegetation before and after use.

Safety Precautions
• Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets.
• Keep out of reach of children.
• Exposure to sodium hydroxide or sodium metasilicate could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.
• Do not ingest.
• Always wear personal protective equipment when using this product.
• DO NOT MIX WITH OTHER CHEMICALS.

Shipping Note
• Expert Clean & Bright Wood Stripper may not be shipped via air transit due to D.O.T. restrictions.

Product Resources
Expert Wood Stripper Safety Data Sheet (SDS)

Expert Clean & Bright Wood Stripper Instructions

Mixing

  • Always wear heavy-duty rubber gloves, NIOSH-approved respirator, and full PPE when working with wood stripper or any other Expert Clean & Bright product. 
  • Wood strippers can cause chemical burns if in contact with skin, eyes, or lungs. 
  • Mix 4 oz – 8 oz of wood stripper with each gallon of cold water, stirring until powder is dissolved. 
  • To avoid clogging the sprayer, mix in a separate 5 gallon pail before transferring it into a pump sprayer. 
  • Use stripper solution within 6 hours of mixing. 
  • Wood stripper solution is red.

Application

  • Wet surface with water before applying stripper solution using a sprayer, brush, or car wash brush, working on small areas of 100-200 square feet. 
  • If applying on vertical surfaces with a sprayer, work on small areas at a time, starting from the bottom and working upward. 
  • If needed, scrub thoroughly with a hard, short-bristled broom or brush. 
  • Keep the area wet using additional solution or mist from a water hose. 
  • Allow stripper to sit for approximately 5-45 minutes or until the desired results are achieved.

Rinse 

  • To clean without damaging the wood, use water from a hose or pressure washer set at the lowest pressure. 
  • For extreme build-up, use a power washer or a hard bristled brush. 
  • If using a power washer, use the lowest pressure setting to achieve the desired result.  Care should be taken to not damage the wood. 
  • Move power washer in a pendulum motion the full length of each board. 
  • Do not start and stop, as scarring or gouging of wood can occur.

Neutralize 

  • Immediately neutralize wood using Expert Clean & Bright Wood Brightener. 
  • Let wood brightener sit for 5-15 minutes, ensuring the entire surface has been properly neutralized and rinsed thoroughly.

Important 

  • After wood brightener is applied, rinse wood’s entire surface for 10-15 minutes. 
  • Rinse all nearby surfaces, including siding, windows, and foliage. 
  • Allow wood surfaces to dry 48-72 hours (or longer) before applying Expert Stain & Seal wood stains. 
  • Stains must be applied when wood is dried to 13% moisture content or less.

Clean-Up

  • Clean tools and equipment immediately after each use with soap and water.

Product Questions

Have a Question?

Be the first to ask a question about this.

Ask a Question
DETAILS

Expert Clean and Bright Wood Stripper is made with Sodium Hydroxide and an added Sodium Metasilicate boost to help lift old oil-based stains, extreme organic growth and some water based coatings. A butyl booster can be added to remove tough water-based stains.

Always brighten the wood after using this cleaner using Expert Clean and Bright Wood Brightener.

Mixing Instructions
• For a light strip, mix 2 oz. cup per gallon of water.
• For a medium strip, mix 4 oz. per gallon of water.
• For a heavy strip, mix 8 oz. per gallon of water.

General Instructions
• Strippers must be kept wet or they will not work.  A light mist every few minutes will suffice.
• Test on a small, inconspicuous area of the wood to ensure proper wood care.
• Always wet plants, shrubs, and other surrounding vegetation before and after use.

Safety Precautions
• Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets.
• Keep out of reach of children.
• Exposure to sodium hydroxide or sodium metasilicate could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.
• Do not ingest.
• Always wear personal protective equipment when using this product.
• DO NOT MIX WITH OTHER CHEMICALS.

Shipping Note
• Expert Clean & Bright Wood Stripper may not be shipped via air transit due to D.O.T. restrictions.

Product Resources
Expert Wood Stripper Safety Data Sheet (SDS)

MORE INFORMATION

Expert Clean & Bright Wood Stripper Instructions

Mixing

  • Always wear heavy-duty rubber gloves, NIOSH-approved respirator, and full PPE when working with wood stripper or any other Expert Clean & Bright product. 
  • Wood strippers can cause chemical burns if in contact with skin, eyes, or lungs. 
  • Mix 4 oz – 8 oz of wood stripper with each gallon of cold water, stirring until powder is dissolved. 
  • To avoid clogging the sprayer, mix in a separate 5 gallon pail before transferring it into a pump sprayer. 
  • Use stripper solution within 6 hours of mixing. 
  • Wood stripper solution is red.

Application

  • Wet surface with water before applying stripper solution using a sprayer, brush, or car wash brush, working on small areas of 100-200 square feet. 
  • If applying on vertical surfaces with a sprayer, work on small areas at a time, starting from the bottom and working upward. 
  • If needed, scrub thoroughly with a hard, short-bristled broom or brush. 
  • Keep the area wet using additional solution or mist from a water hose. 
  • Allow stripper to sit for approximately 5-45 minutes or until the desired results are achieved.

Rinse 

  • To clean without damaging the wood, use water from a hose or pressure washer set at the lowest pressure. 
  • For extreme build-up, use a power washer or a hard bristled brush. 
  • If using a power washer, use the lowest pressure setting to achieve the desired result.  Care should be taken to not damage the wood. 
  • Move power washer in a pendulum motion the full length of each board. 
  • Do not start and stop, as scarring or gouging of wood can occur.

Neutralize 

  • Immediately neutralize wood using Expert Clean & Bright Wood Brightener. 
  • Let wood brightener sit for 5-15 minutes, ensuring the entire surface has been properly neutralized and rinsed thoroughly.

Important 

  • After wood brightener is applied, rinse wood’s entire surface for 10-15 minutes. 
  • Rinse all nearby surfaces, including siding, windows, and foliage. 
  • Allow wood surfaces to dry 48-72 hours (or longer) before applying Expert Stain & Seal wood stains. 
  • Stains must be applied when wood is dried to 13% moisture content or less.

Clean-Up

  • Clean tools and equipment immediately after each use with soap and water.
REVIEWS
PRODUCT QUESTIONS

Product Questions

Have a Question?

Be the first to ask a question about this.

Ask a Question