Skip to content
Capture Log Stain
FREE SHIPPING ON 5 GALLON PAILS TO CONTINENTAL USA.
Free Ground Shipping on 5 Gallon Pails
We are offering free shipping for 5 gallon pails of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.
Capture Log Stain is specifically designed to protect your home no matter what the weather condition or elevation. Capture's unequaled formula allows the coating to move freely as your logs inevitably expand and contract.
Loaded with UV absorbers, Capture protects your home from the damaging effects of the sun's ultraviolet rays. Capture glides on and clean up is easy with just soap and water. Capture Log Stain is the pigmented part of a two-part system: An extremely effective, attractive stain followed by a clear, weather-repellent topcoat called Cascade. Cascade provides added exterior protection against damaging UV rays. It dries with a modest sheen and adds depth to the appearance of stained logs. Use one of Capture Log Stain's ten beautiful, transparent colors and see your logs come alive as every knot, grain and detail is enhanced.
Sashco Capture Features & Benefits
• Brings out logs' natural beauty.
• So elastic it bridges gaps of small cracks.
• Loaded with highest-quality UV inhibitors and trans-oxide pigments.
• Easily maintained with Cascade.
• Highly breathable – allows moisture to escape.
• Water-based – easy to apply and clean up.
• Freeze-thaw stable.
Sashco Capture Coverage Rate
• 1st coat: 150-250 sq. ft. per gallon.
• 2nd coat: 250-350 sq. ft. per gallon.
• As with all stains, coverage will vary depending upon roughness and porosity of the wood.
Sashco Capture Application Instructions
• Apply Capture when the temperature is 40°F and rising to 90° and falling.
• In severe conditions (under 40°F and/or 70%+ humidity), full rain resistance may take longer.
• Cover exterior walls with plastic if rainfall or snowfall is expected within 24 hours after application.
• Dries to the touch in 30 min. or less in ideal weather. Will retain a slight tackiness until top-coated with Cascade.
• Cleanup: Soap and water.
• On the exterior: spray and back brush in (2) heavy coats of Capture Log Stain followed by (1) heavy coat of Cascade.
• On the interior: (1) coat either brushed or sprayed on is sufficient, followed by (1) to (2) coats of the Symphony clear coat.
• When Cascade is applied heavily it is able to build sufficient film thickness to protect the wood and provide several years of good performance.
Product Guides
Capture Log Stain Product Guide
Capture Stain Brochure with Color Chart
Guide to Using Capture/Cascade with Fiber Cement Siding
Case Study: Capture Stain Results at Ritz Carlton in Beaver Creek, CO
Capture Log Stain SDS
Sashco Technical Support
If you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at 800-767-5656.
Product Questions
-
Is the Capture Dark Walnut color available in the Pre-Mix?
Unfortunately, the new Dark Walnut color for Capture Stain is currently available only in the Flex Tint version.
-
Would it be okay to mix Capture and Cascade together?
No, mixing Capture and Cascade together would hurt the performance of both products.
-
Do you have to spray on Capture or could you brush it?
Yes, you can spray or brush apply Capture. Sashco's recommendation is to spray one heavy coat of Capture to the point of refusal for the first coat. Next, coat the log ends multiple times to ensure the pores are sealed. Follow behind immediately with vigorous back brushing using large 5-6 in. deck and siding paint brushes on 3-4 ft. long poles. This forces the stain into the pores of the wood and promotes penetration and adhesion. Sashco recommends applying a second, lighter coat of Capture once the first coat has dried. Lastly, be sure to finish by spraying on one heavy coat of Cascade. Be sure to brush out any runs with each coat.
-
Does Capture have any mildewcide?
Capture does contain a small amount of algaecide. If you have had problems with mold or mildew growing on the surface of a stained wall, we recommend adding a mildewcide additive such as Mildew-X or Add-2 to a coat of Cascade when you do a maintenance coat of stain.
DETAILS
Free Ground Shipping on 5 Gallon Pails
We are offering free shipping for 5 gallon pails of this product shipping to the Lower 48 United States. Offer does not apply to Alaska, Hawaii, and the US Territories. Free Shipping applies to this item only and not the entire order.
Capture Log Stain is specifically designed to protect your home no matter what the weather condition or elevation. Capture's unequaled formula allows the coating to move freely as your logs inevitably expand and contract.
Loaded with UV absorbers, Capture protects your home from the damaging effects of the sun's ultraviolet rays. Capture glides on and clean up is easy with just soap and water. Capture Log Stain is the pigmented part of a two-part system: An extremely effective, attractive stain followed by a clear, weather-repellent topcoat called Cascade. Cascade provides added exterior protection against damaging UV rays. It dries with a modest sheen and adds depth to the appearance of stained logs. Use one of Capture Log Stain's ten beautiful, transparent colors and see your logs come alive as every knot, grain and detail is enhanced.
Sashco Capture Features & Benefits
• Brings out logs' natural beauty.
• So elastic it bridges gaps of small cracks.
• Loaded with highest-quality UV inhibitors and trans-oxide pigments.
• Easily maintained with Cascade.
• Highly breathable – allows moisture to escape.
• Water-based – easy to apply and clean up.
• Freeze-thaw stable.
Sashco Capture Coverage Rate
• 1st coat: 150-250 sq. ft. per gallon.
• 2nd coat: 250-350 sq. ft. per gallon.
• As with all stains, coverage will vary depending upon roughness and porosity of the wood.
Sashco Capture Application Instructions
• Apply Capture when the temperature is 40°F and rising to 90° and falling.
• In severe conditions (under 40°F and/or 70%+ humidity), full rain resistance may take longer.
• Cover exterior walls with plastic if rainfall or snowfall is expected within 24 hours after application.
• Dries to the touch in 30 min. or less in ideal weather. Will retain a slight tackiness until top-coated with Cascade.
• Cleanup: Soap and water.
• On the exterior: spray and back brush in (2) heavy coats of Capture Log Stain followed by (1) heavy coat of Cascade.
• On the interior: (1) coat either brushed or sprayed on is sufficient, followed by (1) to (2) coats of the Symphony clear coat.
• When Cascade is applied heavily it is able to build sufficient film thickness to protect the wood and provide several years of good performance.
Product Guides
Capture Log Stain Product Guide
Capture Stain Brochure with Color Chart
Guide to Using Capture/Cascade with Fiber Cement Siding
Case Study: Capture Stain Results at Ritz Carlton in Beaver Creek, CO
Capture Log Stain SDS
Sashco Technical Support
If you have questions or issues regarding the Sashco line of products, Sashco Technical Support is available at 800-767-5656.
REVIEWS
PRODUCT QUESTIONS
Product Questions
-
Is the Capture Dark Walnut color available in the Pre-Mix?
Unfortunately, the new Dark Walnut color for Capture Stain is currently available only in the Flex Tint version.
-
Would it be okay to mix Capture and Cascade together?
No, mixing Capture and Cascade together would hurt the performance of both products.
-
Do you have to spray on Capture or could you brush it?
Yes, you can spray or brush apply Capture. Sashco's recommendation is to spray one heavy coat of Capture to the point of refusal for the first coat. Next, coat the log ends multiple times to ensure the pores are sealed. Follow behind immediately with vigorous back brushing using large 5-6 in. deck and siding paint brushes on 3-4 ft. long poles. This forces the stain into the pores of the wood and promotes penetration and adhesion. Sashco recommends applying a second, lighter coat of Capture once the first coat has dried. Lastly, be sure to finish by spraying on one heavy coat of Cascade. Be sure to brush out any runs with each coat.
-
Does Capture have any mildewcide?
Capture does contain a small amount of algaecide. If you have had problems with mold or mildew growing on the surface of a stained wall, we recommend adding a mildewcide additive such as Mildew-X or Add-2 to a coat of Cascade when you do a maintenance coat of stain.
